size
11m x 1.37m x 10mm
A recycled soundproofing underlay for carpets. Significantly reduces impact noise such as footfalls and furniture movement from disturbing the neighbours below.
Sue James, Didcot
Produced from recycled rubber and high grade felt, A10 Acoustic Carpet Underlay is designed for installation beneath carpets to give a superior reduction in impact noise through the floors below.
It is suitable for all types of floor surfaces including wood, concrete, asphalt and is particularly recommended on uneven floors.
A10 carpet underlay soundproofing is not designed to reduce airborne noise nuisance. To reduce airborne noise, see our Quiet-Floor product.
Impact Sound Improvement Index ISO Method 140 part 8
- Delta Lw.34Db
This product meets the Part E building regulations standard for impact
noise on a concrete floor. The tested sample meets the requirements of
BS.5808:1991(1996)
However, on concrete floors, provided they have the required amount of mass (350kg/m2) the new Approved Document E regulations for both airborne and impact noise penetration through the floor will be met if A10 is glued to the floor surface with our special spray adhesive
Classification: Heavy Contract/Heavy Domestic BS 5808 Fitting should meet the British standard code of practice BS 5325, normally be undertaken by experienced fitters and should be laid rubber to the floor surface. Sub floors should be clean, dry and free of oil, grease and damp.
