size
Supplied on a black 10m coil. 5 or 10mm thick with varying widths.
A self adhesive EPDM foam rubber acoustic sealing tape for decoupling stud work from the surrounding surfaces.
Mary Carter
A self adhesive EPDM foam rubber Acoustic Sealing Tape. This product is designed for sealing and cushioning stud work or battening. The EPDM is age resistant and chemically neutral against the most commonly used lacquers and plastics. These EPDM acoustic strips are resistant to most caustic chemicals, the ozone, moisture and UV radiation.
We generally supply these as black 5 or 10mm thick / 10m length coils with a self adhesive backing but can produce non self adhesive and alternative thicknesses and widths if required.
Widths stocked are between 10mm - 100mm as standard in 10mm increments.
Subject to a minimum order we can also supply other types of rubber sheeting or coils. Please call our technical team on 0845 363 7131 with any enquiry.
When using wooden battening in the construction of a new isolated stud wall we would always recommend sitting the stud work on 10mm thick acoustic strip as outlined in the graphic below.
By sandwiching the EPDM between the wood and the floor and surround walls / ceiling you create a much more isolated system. This in term dramatically reduces any vibration and flanking noise being transmitted into the adjoining rooms or properties.
The Acoustic Tape does not replace the need for decoupling the wall with the Resilient Bar but does help greatly increase the walls performance against low frequency bass vibration.
PLEASE NOTE: THIS PRODUCT DOES NOT REDUCE AIRBORNE SOUND TRANSMITTED THROUGH WALLS.
