These DIY Acoustic Enclosure Kits are ideal for controlling noise from small, noisy equipment by reducing the reflection of sound from boundary surfaces thus reducing the overall noise levels. Using this kit will greatly help comply with the Control of Noise at Work Regulations. If you have noisy equipment in the workplace.
The kits detailed below are designed to be installed within a secure enclosure usually made from 18mm MDF or other dense material. The kits are easy to install and come with detailed fitting instructions. The acoustic lining to the enclosure is our Foam/barrier SA25FF/B/6 sound absorber has a tough, black film face and was originally designed to reduce noise from inboard boat engines. This foam is easily glued by sticking the bare foam side to the inside of the enclosure.
The Anti-vibration Pad is designed to isolate the piece of equipment such as a shower pump from the substrate where it is normally fixed and would normally be installed as two layers, glued each side of a high density block such as a small patio slab.
The full install instructions can also be seen above. More information on soundproofing enclosures can be seen here
Our Small Pump Kit contains:
1 x sheet of SA25FF/B/6 foam/barrier
1 x panel of Anti-vibration Pad.1 x tube of Acoustic Sealant
1 x can of Aerosol Adhesive
1 x Set of fitting Instructions (Suitable for small domestic pumps)
Our Large Pump Kit contains:
4 x sheets of SA25FF/B/6 foam/barrier
2 x panels of Anti-vibration Pad.
1 x tube of Acoustic Sealant2 x cans of Aerosol Adhesive
1 x Set of fitting Instructions (Suitable for larger commercial pumps or other noisy equipment)
IF YOU REQUIRE EXTRA MATERIALS THESE CAN BE PURCHASED INDIVIDUALLY FROM US.
Applications for the Enclosure Kits would be;
Machinery enclosures, small pumps such as noisy shower pumps, plant machinery, compressors, office equipment and domestic appliances. If you have a noise problem and want our advice call 0845 363 7131 before ordering.