We are open Monday to Friday
Product Hotline - 01993 704 981
Local call rate - 0845 363 7131

Soundproofing Foam (SA25FF/B/6)

1201 Soundproofing Foam (SA25FF/B/6)

Product Details

Size:  1200 x 900 x 32mm thick (4ft x 3ft x 1¼”)

PRICES

Technical Specs

Installation Guide

Product PDF

SOUND PROOFING FOAM FOR ENGINE BAYS AND ENCLOSURES

SA25FFB6 is a black, film faced sandwich construction comprising both a 6mm and 25mm thickness of specially formulated sound absorbing foam each side of a heavy sound barrier creating an effective soundproofing foam to reduce noise from engines, pumps and other noisy machinery.

Key Benefits

  • Effective airborne absorption for small cavities and enclosures.
  • Easy to cut with a knife.
  • Easy to stick with our special spray adhesive.
  • Easy wipe clean surface

TESTIMONIAL FOR SA25FFB6

“I’d just like to thank you for firstly the quick delivery and helpful advice your team has given. Now the neighbours will continue to be friendly, the matting worked a treat!!”                                                                                   Jason Woolleson

Hard-Wearing High Degree Of Soundproofing

VIDEO: SEE A CLOSER LOOK AT THIS PRODUCT HERE

These composites are specifically designed to reduce noise pollution from enclosed areas where a high degree of sound proofing is required combined with resistance to wear and tear.

The polyurethane skin is a tough, oil and water resistant coating protecting the insulation which is able to give effective sound absorption wherever internal engines or hydraulic power packs are used without the problem of liquid or dust contamination.

A sandwich construction comprising both a 6mm and 25mm thickness of specially formulated sound absorbing foam each side of a mineral loaded polymeric sound barrier. The thicker layer of foam is protected by the thin, very tough polyurethane skin.

Effective Sound Absorption For Internal Engines, Hydraulic Power Packs, Compressor Housing, Plant Machinery And More

Use in marine engine compartments, hydraulic power pack enclosures, compressor housings, plant machinery and many more. The insulation is simply glued into position with the film face uppermost on the inside walls using our special contact adhesive. However, if the product is to be inverted, due to the heavy weight of the insulation, it is recommended it is also secured with additional mechanical fixings.

LOOKING FOR A FIREPROOF VERSION OF THIS PRODUCT? See here