We are open Monday to Friday
Product Hotline - 01993 704 981
Local call rate - 0845 363 7131

Thin Wall Soundproofing System

New M20 M20AD 50mm Wall Soundproofing

Product Details

Size:  1m x 1m x 20mm

PRICES

Technical Specs

Installation Guide

Test Certificate

Product PDF

SYSTEM overview

This 50mm thin soundproofing wall system uses a recycled rubber panel designed to upgrade the sound insulation properties of party walls in domestic properties.  This system has been introduced when thicker, more efficient soundproofing systems cannot be used due to lack of space.

Testimonial

“I ordered the Thin Wall System. It is now fitted and works very well – big improvement.” Matthew Heritage

“The materials are working very well and have reduced the noise propagation enormously. I am very satisfied with the products.” Manuel Jimenez

Description.

newbrochure 0011 M20AD 50mm Wall Soundproofing

The Thin Wall System is designed to absorb and reduce the amount of airborne noise which penetrates poorly insulated party walls. We have created this easy to order system for you but all the products can be purchased individually from other web pages on our site if preferred.

Supplied with all the following products included;

M20AD soundproofing (1m x 1m square and 20mm thick)

Sta-Stuk  Spray Adhesive (15oz 426 gram cans)

Acoustic Sealant (380ml tube. 10.5 linear metres approx per tube)

2 x layers of Acoustic Plasterboard (15mm thick, 2.4m long and 1.2m wide sheets) MIN ORDER OF 5 SHEETS DUE TO SHIPPING.

The system is easy to fit with little D.I.Y experience and is simply glued to the existing wall with two layers of 15mm Acoustic Plasterboard bonded on top.  Once ordered the products are all delivered with full step by step installation instructions.

Work out the area of your wall then use our product selector below to calculate how much you need. Give us a call on 0845 363 7131 if you have any difficulty.

Product Selector for Thin Wall System

    YOUR

    WALL

    AREA

    in  m2

              Acoustic

         Plasterboard

 (Figure shows 2 layers)

     M20AD

Wall Panel

 Acoustic   Sealant

  M20 Adhesive

1
1
1
1
2
2
2
2
1
3
3
3
3
2
4
4
3
4
2
5
5
4
5
3
7
6
5
6
3
8
7
5
7
4
9
8
6
8
4
10
9
7
9
5
11
10
7
10
5
12

 

10 M20 R2 small M20AD 50mm Wall Soundproofing

Please note: This system will help reduce normal noise levels, that should not normally be heard, for example talking, radio and TV sound. Loud music and bass noise will always be audible although its intensity will be reduced. For more efficient noise control, see our thicker  independent stud wall system  

Because M20AD is produced from recycled rubber, a ‘rubbery’ smell may sometimes be noticed when the product is first unpacked. Usually any smell will dissipate within a few days. If a smell is evident after installation of the plasterboard, you can seal the wall with a primer sealer that has been tried and tested by another customer. Click on the following link for more information on this http://www.zinsseruk.com/wp-content/uploads/2012/05/B-I-N-TDS.pd

PLEASE BE AWARE THESE PANELS WEIGH 15kg EACH SO YOU MAY REQUIRE HELP LIFTING.