MOTOR VEHICLE SOUNDPROOFING
Most motor vehicles these days have sufficient insulation installed during production. However, if more is required, we can offer the following:
SAPT220
Spaced layer Sound Barrier Mat for the bulkhead and floor of the vehicle throughout. SAPT220 Sound Barrier Mat is designed to reduce mechanical and road noise penetration. To further reduce engine noise, an acoustic bonnet pad can be fitted and for this we can supply
SA12(FR)SA
A self-adhesive, totally fire retardant sound absorbing foam black in colour. This insulation is also available 25mm thick and without a self-adhesive backing if required.
SBM5
A mineral loaded deadsheet Damper Pad that can be used to reduce the resonance produced by steel panels prior to installing any other insulation. However, we do not recommend this insulation is installed beneath bonnets or inside doors. Bonnets get too hot in summer and doors allow water ingress which can affect the stability of the product. SBM5 Deadsheet is a plain insulation that does not require gluing. It works best simply laid directly onto any steel panel and can easily be removed should it be necessary.
VANS
Van bodies and floors are often uninsulated and create a lot of noise and vibration within them. The floors of vans can be insulated with our Acousticel M20AD matting which can be bonded to the floor with our Sprayable Adhesive. M20AD is a recycled rubber product that presents a hard wearing and durable surface but due to its open cell structure, will allow dirt contamination and so is difficult to clean. Therefore, we recommend a board surface is bonded to the top of the M20AD to make the floor more durable.
The interior bodies of vans can be insulated with our sound absorbing foams that are easy to cut and fit and can be glued in situ with our self-adhesive versions. Plain versions are also available if self-adhesive is not required. Click here for more info.