We are open Monday to Friday
Product Hotline - 01993 704 981
Local call rate - 0845 363 7131
Don’t be the victim of a pre-completion test failure, get it right first time by using our superior sound insulation designed specifically for separating floors and walls.
A pre-completion test failure is expensive to put right so confidence in the materials you are using combined with correct installation is most definitely the way to go.
Click on the following R10 link R10 for solutions to effectively sound insulate a timber suspended floor
If you are looking for a resilient insulation for use beneath a concrete screed, click the following G8 link G8. For a solution to reduce impact noise through both concrete and timber floors, consider using our very effective A10 sound insulation. Click the following A10 link for more information A10.
Effective noise control is often a problem with party walls separating flats from common areas and neighbours. For these problems we can supply a very thin (20mm) acoustic insulation that gives excellent results when bonded to a wall with two layers of acoustic plasterboard glued on top. The following M20AD link will provide more information M20AD.
As you can see, we are able to provide you with a solution to comply with the current requirements for noise control through walls and floors. Most of the products we supply for these applications are produced from recycled products making your project more environmentally friendly and helping to comply with the sound insulating requirements of the Document E Building Regulations.