soundproofing:
Acoustic Double Door Seal Kit
overview
Apart from our Acoustic Doorsets, we can also supply acoustic door seals to upgrade existing double doors to make them more soundproof and in kits that will fit almost any size doors.
These doorseal kits are easy to install and supplied in DIY form with full fitting instructions. Each doorseal kit contains soundproofing mats for fixing to existing doors to increase their mass and therefore improve their sound insulation value. In addition there are a full set of acoustic seals to fit around all of the edges of the door frame including the threshold.
description.
What’s in a kit?
6 x 1m RP120 Self Adhesive Acoustic Seals for the top and sides of the door frame
1 x 2m RP16Si Acoustic Seal for the middle door joint (To be cut to size by installer)
2 x 1m TES Acoustic Threshold Seal (To be cut to size by installer)
2 x 1m CDS Threshold Contact Strip (To be cut to size by installer)
2 x Soundproofing Mats (1.8m x 1.2 m)
1 x Bag of fixing screws
1 x Can of Special Spray Adhesive
1 x Set of installation instructions
This kit comes with everything you will need to up rate a standard double doorset without the additional expense of a full Acoustic Doorset & frame. Just basic tools are required to do this but may well involve removal of the door from its frame during the installation. After fixing the soundproofing mat to a door, we suggest thin ply or MDF is fixed on top to finish it off, please refer to the installation guide from the link on the right hand side above.
If your require an acoustic seal not listed above, please contact us because we will almost certainly be able to supply your requirements. For intumescent seals please mention this when ordering. These are available 15mm or 30mm wide.
As featured on www.buildingdesign.co.uk
