size
1m x 1m x 10 or 20mm thick
A black recycled resilient rubber panel designed to absorb and reduce point load vibration for use under washing machines, treadmills and other items that produce vibration.
Dom Winter, Plymouth
A black recycled resilient rubber panel designed to absorb and reduce point load vibration for use under washing machines and treadmills.
This product is ideal for reducing vibration caused from products such a washing machines, compressors or exercise equipment.
It does not reduce the airborne noise that these items might create but helps to de – couple the vibration. The vibration is what will pass through the floor joists to the neighbours below.
The panels are 1 metre square and can be easily cut with a saw
or jigsaw.
If further reduction is needed we would advise doubling up the panels
to create a 40 mm layer.
We advise you add a layer of hard board under the pad as the feet of the product sitting on it may dig into the rubber over time. This can be sourced from any DIY store that sell wood.
The Vibration Pad is also often used under:
Bass speakers
Tumble Dryers
Home cinema sub woofers
Treadmills
Rowing machines
Mini Trampolines
If the 20mm version is too thick we can supply a 10mm version but this will not be as effective. Please make our sales team aware if you require the 10mm version when ordering.
PLEASE NOTE: WE ONLY PROVIDE THE BLACK RUBBER VIBRATION PAD AND NOT ANY WOOD BOARDING THAT WILL SIT ON TOP.
