We are open Monday to Friday
Product Hotline - 01993 704 981
Local call rate - 0208 0909586
Size: 1 x 1m x 32mm thick (3.28ft x 3.28ft x 1¼”)
A non-flammable, 32mm thick silver wear resistant foil faced sandwich construction soundproofing foam comprising both a 6mm and 25mm thickness of specially formulated fire resisting sound absorbing foam each side of a heavy sound barrier layer. Designed for reducing noise from machinery that may have a higher fire risk.
These composites are specifically designed to reduce noise pollution from enclosed areas where a high degree of sound proofing is required combined with resistance to wear and tear.
The Class 0 aluminium skin is a tough, oil and water resistant coating that protects the sound insulation material without reducing the effective sound absorption of the product from internal engines, plant machinery on oil rigs and hydraulic power packs and without the problem of liquid or dust contamination.
A sandwich construction comprising both a 6mm and 25mm thickness of specially formulated non-flammable sound absorbing foam each side of a mineral loaded polymeric sound barrier. The thicker layer of foam is protected by a thin, tough aluminium skin.
Inboard boat engine compartments, hydraulic power pack enclosures, compressor housings, plant machinery and many more. The acoustic insulation is simply glued into position on the inside walls using our aerosol Special contact adhesive. However, when the sound insulation is inverted, due to the weight of this product, we recommend it is secured with additional mechanical fixings.
We would also suggest using our Aluminium Jointing Tape to finish off any joints.
