We are open Monday to Friday
Product Hotline - 01993 704 981
Local call rate - 0208 0909586

QuietPanel Soundproofing for Party Walls

QuietPanel is an ultra thin 27.5mm thick easy applied soundproofing solution to upgrade the sound insulation of party walls.  QuietPanel should be used on single party walls of masonry construction or lighter weight stud walls to obtain the best performance.  Thicker solutions of noise control will usually give better results when trying to reduce noise from neighbours through party walls but sometimes thicker solutions are not always possible for various reasons. 

This is why we introduced these thinner acoustic panels which are designed for when thicker, more efficient soundproofing systems are not possible due to the close proximity of doors or windows.

This thinner system of sound insulation for walls is very popular and is also a favourite of construction companies when refurbishing houses or flats.  Because the QuietPanel system is so thin, it is often used to upgrade the sound insulation of walls dividing bedrooms or other rooms in the home.  These days, new properties are often built with lightweight stud walls to separate rooms and because they do not have the density of the older masonry walls are not as efficient at reducing sound transfer between rooms.  Because stud walls nearly always perform badly for noise control unless acoustically treated during construction, it is necessary to upgrade them when more privacy is required for noise insulation but now they can be upgraded using the QuietPanel system that is easy to screw on and takes up very little space.  So more  privacy can now be obtained without losing too much space and using a system that will not break the bank.

For more information on QuietPanel including technical specifications and installation instructions, go to our web page via this link


or call us on 01993704981

Upgrade Sound Insulation of Floor

Although originally developed as part of a system of soundproofing to comply with the Part E regulations for the control of noise through floors, our R10 recycled rubber resilient insulation is often the preferred option by domestic flat owners that wish to upgrade the soundproofing of their floors.  R10 is a resilient insulation designed for use beneath a floating floor to reduce impact noise as well as airborne noise.  The floating floor can be our high density QuietBoard, a tongued and grooved acoustic floor board or engineered flooring at least 18mm thick which is popular these days.  Fitting a floating floor system with our R10 directly on top of an existing floor will give an immediate benefit in sound loss through the floor but for even better results, AMW type acoustic mineral wool should also be fitted loosely between the joists.  More information including installation instructions for all of our noise control products can be viewed on our web site www.keepitquiet.co.uk